Using the device as a speaker
You can also use the unit as a pure speaker. To avoid feedback, do not hold
the microphone too close to the speaker during use.
1
Stop playback from CD or USB and remove the 3.5 mm jack plug if one
is connected to the AUX output.
2
Turn on the microphone and start. Adjust the volume using the master
control or the microphone volume control.
LED light show
•
The light show inside the speaker and in the lower corners of the unit
automatically reacts to the music that is currently playing.
•
To start the light show, slide the light show slider to ON.
•
Slide the slider to OFF to switch off the light show.
CLEANING AND CARE
Please note: switch off the unit before cleaning. Disconnect the power
supply unit and/or remove the batteries.
•
Never immerse the device in water or other liquids to clean it.
•
Clean the surface of the unit with a soft, slightly damp cloth. Ensure that
no water gets into the unit.
•
Never use abrasive cleaners or hard objects such as scouring pads
cleaning.
•
Dry the unit carefully after cleaning.
•
Store the unit in a cool, dry place.
EN
37