General Functionality; Switch Panel - Opera CAMPO Manual De Usuario

EN

General functionality

The extractor hood has been developed especially for the extraction of cooking vapours for
use in the private home.The arised cooking vapours are catched by the extractor hood and
absorbed by the metal grease filter (version D is add. equipped with an active carbon filter).
The filters are held in the hood body by magnets. By some models the filter is covered by a
pane. The accruing extraction at the edge of the pane ("Perimeter Extraction") allows a very
effective fume absorption.The access to the filters is guaranteed by models using the
"Perimeter Extraction" method through the swinging of the pane. The exhaust power is con-
trolled over the switch panel. Among the lighting additional options are also controlled over
the switch panel by some extractor hoods.The illumination of the cooking zone is taken o-
ver by several LED spotlights. The extractor hood is produced of stainless steel or alumini-
um.

7 Switch Panel

Power of the supercharger
The first four buttons control the
power of the supercharger.
Button „1" = low performance of the supercharger
Button „2" = middle performance of the supercharger
Button „3" = high performance of the supercharger
Button „Int" = intensive level
Press any button to switch on the extractor hood. The hood is switched off by pressing the
back-lighted keys once more. The extractor hood automatically switches back after 3 min.
from the intensive level to level 3 ( high performance of the supercharger ).
Automatic cool down period
By pressing the key with the follow-up time clock symbol, the automatic follow-up time is
activated and the follow-up time symbol flashes. The cooker hood switches back one step
at 5-minute intervals from the current step and switches off permanently after a maximum
of 15 minutes.
Illumination
Press the button with the light symbol to turn on the illumination. The illumination is turned
off by pressing the button again. The illumination is dimmed by pressing and holding the
button for a longer period. Brightness is raised again by another long press of the button.
Colour temperature setting ( TW tunable white )
The colour temperature of the LED hob lighting can be infinitely adjusted between 2700K
and 6500K.
Press and hold the delay button to adjust, the LEDs start to change the colour temperature.
When the desired setting is reached, release the button, the colour setting is saved.
Filter saturation indicator
If the grease filter indicator lights up (right button see figure at the top ), the filter must be
cleaned. After cleaning the filter, press and hold the button for 10 seconds. The indicator
light goes out. The grease filter display is activated after max. 15 operating hours
and reset only possible when switched on / TW function is deactivated when the red LED flashes ! )
16
PRODUCT DESCRIPTION
OPERATION MANUAL
Reset: Clean Grease Filter
Alert Button min. 5 sec.
pressures to a red LED goes off !
( Display