Cleaning And Care; General Topics - Opera CAMPO Manual De Usuario

EN

Cleaning and care

Risk of electric shock ! Please separate the extractor hood from the power supply
network by pulling the plug or the disconnection of the fuse. Please pay attention
to the fact that no water seeps into the appliance during the cleaning process.
Untimely cleaning of the surface saves later a troublesome removing of stubborn
soiling. For the cleaning use only commercial detergent or all-purpose cleaners
which are suitable for stainless steel / aluminium. Please do not use scouring
agents or steel wool! After the cleaning of the extractor hood please tend the
stainless steel surfaces with a high-grade steel-care product.
Only with a light soapy water and a very soft cloth varnished surfaces have to be cleaned.
Please clean the switch panel only with a soft and damp-dry cloth.
By extractor hoods with a pane beneath the metal grease filter ("Perimeter Extraction") fatty
deposits can occur on the edge of the pane. These deposits are founded physically and re-
present no dysfunction of the extractor hood. Please clean the pane beneath the filter regu-
larly to prevent stubborn soiling.
Cleaning and care instructions
When cleaning the grease filters, also remove any grease deposits from the accessible
housing components. This will prevent a fire hazard and maintain an optimum range of
functions. Use hot soapy water or a mild window cleaning agent to clean the hood. Do not
scratch off baked-on deposits. Soften them using a damp cloth. Do not use abrasive
agents or scouring pads.
Note : Do not use alcohol (spirits) on plastic surfaces, as dull spots may result.
Caution : Ventilate the kitchen sufficiently, no open flame. Only clean the operating panel
with a soft damp cloth (mild detergent solution). Do not use stainless steel cleaners for the
sliding switch/pressure switch.
Stainless steel surfaces::
Use a mild and non-abrasive stainless steel cleaning agent. Do not clean stainless steel
surfaces with abrasive scouring pads or with cleaning agents containing sand, soda, acid
or chloride! Clean in direction of polish only. We recommend our stainless steel cleaner no.
TZ701. See the enclosed service booklet for the order address.
Aluminium, varnished and plastic surfaces:
Use a soft microfibre cloth. Do not use dry cloths. Use a mild window-cleaning agent. Do
not use aggressive cleaning agents or agents containing acid or lye ! Do not use scouring
agents.
18

GENERAL TOPICS