KTM 60712964044 Instrucciones De Montaje página 24

5 ASSEMBLY
10
Assembling
–
Position hand guard.
–
Tighten screw
Guideline
Screw, hand guard
502270-01
Cable routing
–
Route both cables of the heated grip along the existing
cables down to the steering head and secure with cable
ties.
Info
For easier assembly it is advisable to first pull the
cable guide
502276-01
–
Remove cable tie from original connector
Info
The fuel tank may have to be removed to reach the
original connector
–
Remove protection cap
502277-01
3
.
M6 10 Nm (7.4 lbf ft)
8
up and out on the right side.
9
9
.
bk
.
.