Dashboard - Segway KickScooter Manual Del Producto

EN
Handlebar Functions
USB Port
Name Function Operation method
Press the Power Button to power on the scooter. Press and hold to power it off.
Power on/off
* Available only when the scooter is not in Anti-theft mode.
Power Button
Wake up the dashboard Press the Power Button to wake up the dashboard when the dashboard automatically dims.
Mode Switching
Switch between speed modes Press the Mode Switching Button twice to switch mode.
Button
Turn on/off the cruise Enabling the cruise mode via the Segway-Ninebot app:
mode Press the Multi-function Button to turn on the cruise mode, press again to turn it off.
Multi-function
Button
Turn on/off the headlight
Rotate the Multi-function Button clockwise/counterclockwise to turn off/on the headlight.
Rotate the Multi-function Button clockwise/counterclockwise and hold it for 3 seconds to
Turn on/off the adaptive
turn off/on the adaptive headlight feature. * When the scooter is activated, this feature is
headlight feature
turned on by default.
Press the Multi-function Button to confirm the password after entering the password
Confirm the password
with the Direction Indicator Button successively.
USB Port Charging Connect your device to the USB Port for charging.
Enabling ASSIST mode via the Segway-Ninebot app:
Press and hold the throttle for 5 seconds to activate ASSIST mode.
Activate ASSIST mode
Throttle * Exit ASSIST mode: Release the throttle and squeeze the brake lever, and slow down to zero speed.
Speed up Press and hold the throttle to speed up.
Interact with the NFC card to
Tap the NFC card on the NFC Area to power on/off the scooter.
Power on/off
NFC Area
Interact with the NFC card to
Tap the NFC card on the NFC Area to unlock the scooter.
unlock
Horn Button Turn on the horn Press the Horn Button, the scooter will beep.
Turn on the left/right Press the left/right side of the Direction Indicator Button, the left/right direction indicator
direction indicator will flash, and automatically turns off after 5 seconds.
Direction
Indicator Button Press the left/right side of the Direction Indicator Button (left is minus, right is plus) to enter the
Enter the password
password. * The password is set to 1-2-3-4 by default. Change it via the Segway-Ninebot app.
02

Dashboard

Power Button
USB Port Icon
Mode Switching Button
Speedometer
Throttle
Temperature Warning
Cruise Mode
NFC Area
Headlight (on)
Horn Button
Headlight (off)
Multi-function Button
ASSIST Mode
Direction Indicator Button
Lock
Adaptive Headlight
Direction Indicator
Name Description
Symbol Meaning
POWER Progress Bar The symbol displays the motor output power of the scooter.
Speedometer
The symbol displays the current speed of the scooter.
Enabling the cruise mode via the Segway-Ninebot app:
1) In ECO, DRIVE or SPORT mode, press the Multi-function Button to activate the
cruise mode when the speed ＞ 3.1 mph (5 km/h). Then the scooter will cruise at the
current speed.
The symbol indicates
Note: When the cruise mode is activated, the scooter will beep and the front and rear
Cruise Mode that the cruise mode
direction indicators will flash once respectively.
is activated.
2) Turn off the cruise mode with the following methods:
Method 1: Twist the throttle or squeeze the brake lever.
Method 2: Press the Multi-function Button.
Method 3: Switch the speed mode.
When the scooter is powered off after 30 seconds:
When the icon flashes,
If the scooter is moved or touched by someone, it will enter to Anti-theft mode. At this
it means the scooter
point, the scooter will start beeping and the front and rear direction indicators will
enters Anti-theft mode. flash, and the motor will be locked automatically.
Note: Only available to power on the scooter with NFC card.
When locked via the Segway-Ninebot app or in the unlocking state via password, the
scooter will keep beeping and the tail light will flash.
Unlock the scooter with the following methods:
Lock
1) Press the Power Button to wake up the dashboard, the dashboard will display the
When the icon lights
digit "0" by default, then enter the four-digit password 1-2-3-4 with the Direction
up, it means the
Indicator Button and confirm the password with the Multi-function Button
scooter is locked.
successively.
Note: Enable/Disable the unlock with password feature via the Segway-Ninebot app
and set your own password.
2) Tap the NFC card on the NFC Area.
3) Unlock via the Segway-Ninebot app.
EN
POWER Progress Bar
WALK Mode
PARK Mode
ECO Mode
DRIVE Mode
SPORT Mode
Bluetooth
Warning
Remaining Battery Power
Direction Indicator
NFC Area
03