Rechargeable Floor Cleaner Use instructions
Do not use to pick up hazardous materials and chemicals such as
solvents, drain cleaners, or strong acids.
Do not use to pick up sharp or large objects such as metal nails, pie-
ces of glass, metal clips or pins.
Before use, install the tanks, roller and filters correctly.
Always switch off the appliance before changing accessories or put-
ting away the appliance.
Product description Fig A
1. On / off button
2. Speed selection button
3. Self-cleaning button
4. LED display
5. Unlock button for dirty water tank
6. Dirty water tank handle
7. Float
8. Dirty water tank
9. Brush cover opening button
10. Brush cover
11. Roller brush housing
12. Handle lock
13. Clean water tank release button
14. Clean water tank handle
15. Clean water tank
16. Wheels
17. Battery charger
18. Docking / charging / self-cleaning base
19. Roller brush with roller stop
20. Cleaning brush
21. Housing base fixing screws
22. HEPA filter
Display description Fig.B
23. Battery level indicator
24. Low speed indicator
25. Roller brush blocked indicator
26. Self-cleaning function indicator
27. Reload symbol indicator
28. Active water wash indicator
29. High speed indicator
30. Clean water tank empty indicator
Product assembly
Insert the handle into the appropriate entry in the upper part of the device, near the LED display. Push the handle
down until you hear a click.
To remove the handle, use a screwdriver and press the locking button behind the handle and pull it upwards
(Fig. C).
Assemble the housing base (Fig.D) and fix the two pieces with the screws included in the package.
Make sure that the HEPA filter is correctly inserted: remove the dirty water tank by pressing the release button
and check that the HEPA filter is present (Fig.E).
To reinsert the tank, first insert the lower part of the tank into the main unit, then, holding down the release button,
push the upper part of the tank. Release the button and check that the tank remains firmly in its housing.
14