Operating manual
SWM
Figure 1: schematic communication diagram between the LEB device's driver (API) and the related software
In order to make basic use of the SWM with a charger, we provide a Windows-based software application; this is the
CNT Datalog and it is available on your client-access intranet in the 'Tools' section.
During the LEB device's scan, the SWM's name will be formatted in the following way:
SWM-00.00.000000.00 (SWM - Serial Number)
Once the connection is established and the services are available, it will be possible to communicate with the SWM
through its respective service and features.
For easy implementation, we provide an application that creates a gateway between the LEB device driver and a
Microsoft Window's TCP server. In this instance, there is no need to use the LEB device's APIs. The user only has to
run the software provided by GYS and set up a TCP client in their dedicated software in order to communicate with the
SWM.
The TCP communication format is the same as described in the rest of this manual with additional commands provi-
ded with this program (LEB device scan, etc).
SWM
Translation of the original
instructions
Bluetooth Low Energy
SWM Services
Custom service
UUID = ed2b4e3a-2820-
492f-9507-df165285e831
Characteristic RX
UUID = ed2b4e3c-2820-
492f-9507-df165285e831
Characteristic TX
UUID=ed2b4e3b-2820-
492f-9507-df165285e381
Figure 2: The SWM unit and its two reading/writing features
Figure 3: schematic diagram using GYS' software
LINUX / ANDROID / IOS
Bluetooth
Low Energy
Apple / Google
/ LINUX API
(Driver)
Enable this feature's notifications
Activate Noti cations on this
to get a response from the SWM
characteristic to get replie from
(RX).
SWM (RX)
Write commands in this feature
Write commands in this
(TX).
characteristic (TX)
E.g.:»Version=?\r\n»
Ex: «Version=?\r\n»
Appareil Windows
GYS
Bluetooth
executable
Low Energy
(BLE -
(Driver)
TCP/IP)
Win 32 / UWP
SMART WIRELESS MODULE
Customer
application
Customer
TCP/IP)
application
11