GREENBLUE GB200 Manual Del Usuario página 2

• Power saving mode: It automatically turns dark after 5 minutes in the brighter display mode.
• Press and hold the M button for 2 seconds， the "24/12Hr" will blinking， press + or - button to
select the timing format you want; then press the M button to switch to Hour / Minute / Unit of
temperature setting in turn. Set item is blinking, adjust it by press + or - button, hold down + or -
button can be quickly adjusted in setting hours and minutes, after all the items are set, press the
M button to confirm the setting and exit the set mode. • If there is no valid operation within
30 seconds, it will automatically return to normal time mode from the set mode.
3). Alarm Clock setting: 3.1 Alarm time setting: This product can set 2 sets of different alarm
clock times. • Push the switch ALARM on the back of the product， the corresponding alarm Symbol
will be lit; Push the switch to ALARM OFF， the corresponding alarm Symbol will be turn off.
• Press the button SET ALARM to query the alarm time.
• Press and hold the button SET ALARM for 2 seconds to enter the alarm setting， the set project will
be blinking, then press + or -- button to adjust the numbers， press the ALARM button again to
switch to the next set item， the set item is in turn: Alarm1 hour—Alarm 1 minute—Alarm 2 hour—
Alarm2 minute—Alarm ringing—Maximum volume of ringtone.
The ringtone S1-5 is a built-in ringtone， S6 is FM radio， S7 is TF card music play， after all the items
are set, press the button to confirm the setting and exit the set mode.
• If there is no valid operation within 30 seconds, it will automatically return to normal time mode
from the set mode. • If you choose S6, the last radio station you've heard before is a ringtone，
If you choose S7 will automatically play the song as a ringtone in TF Card， If it is not installed TF
card, it will automatically with the S1 for ringing tone.
3.2 Snooze function: • The alarm sound volume is slowly increasing at the beginning.
• When the alarm is ringing, press the snooze button >II the alarm mode will to get to Snooze
mode, the symbol SNOOZE is blinking, the alarm signal sounds again after 8 minutes.
3.3 Alarm bell release: • Manual release: When the alarm is ringing, Press any key except >II to
stop the alarm signal. It is not necessary to reactivate the alarm on the same day. It will ring again
at this time the next day. If the FM radio is selected as a ringing, press I<< or >>I key can
be change the radio stations, If the TF card is selected as a ringing, press I<< or >>I key can
be change to play other songs.
• Automatic release: The alarm will sound for 30 minutes if you do not deactivate it.
• After the ring is released, as long as the alarm switch is still in the ALARM position, there will
be a ringtone reminding at the set time of every day.
5. Music play 1) Bluetooth play mode:
• Turn on and select the Bluetooth play mode， symbol BT blinking， means that the Bluetooth pairing
mode is entered， enter the mobile phone Bluetooth settings, search for Bluetooth devices, search
to the device named "P2", click "P2", symbol BT long light means the pairing is complete.
• After Bluetooth pairing completed, the music in the mobile phone is transmitted through Bluetooth
to the product.
• When using Bluetooth to play music, press the button >>I can be pause or continued to play，
press the button I<< will return to play the last song， press button >>I will jump to play the next
song. Press the button + increase volume， press the button -- decrease volume.
-02-
• Press and hold the button >II 2 seconds will enter sleep mode setting, "30" is blinking mean than
It will turn off automatically after 30 minutes. When the "30" is blinking press the button >II again,
it will set the time in 45-60-75-90-OFF-15-30-45...... No operation in 5 seconds to exit the set
mode， symbol SLEEP is blinking in the operation of sleep function.
• When the phone is connected to the product, there is a phone call， press the key >II to connect
the phone， At this time, you can use a microphone at the top of the product to make a hands-free
call， At the time of the call, press >II key to hang up the phone.
• Switching to other play mode or shutdown will disconnect the Bluetooth connection， It is only
allow to connect with one mobile phone at one time, if you want to switch the music source, users
must firstly disconnect then pair with new phone.
2) FM radio • Turn on and select the FM radio mode， symbol FM is lit， the clock will switch to radio
frequency display. • Automatic search: press the button >II the radio will start the search from
87.5MHz， whenever the search to a radio will be automatically saved， and then continue to search，
Until 108MHz to stop， and return to the saved first radio stations to play. Search process shown in
the P01， P02， P03......is the number of the radio station.
• Change radio station: press the >>I botton to switch to the next station， press the I<< botton
to return the previous station. • Other functional operations are the same as the Bluetooth mode.
• If the radio signal is not good, there is a murmur when listening， An audio line or earphone can be
inserted into the AUX Jack of the back as an external antenna to improve the quality of the sound.
Note: This product does not match the audio lines and earphones when they are out of the factory.
3) AUX input mode: • Turn on and select the AUX input mode， symbol AUX lit， insert 3.5mm audio
plug into the AUX jack of back, the other end is connected to the audio player's audio output jack,
then start to play music. • Under this mode, the keys >>I , I<< , >II are not functional， Other
functional operations are the same as the Bluetooth mode.
4) TF card play mode: • This product can play WAV, MP3 format music files in TF card.
• Before using this mode, users must firstly copy music files to the TF card, then push TF card into
card slot, hear "tick" sound means installed in place (Dismantling the TF card is to press the TF
card and hear "tick" sound then it can be pulled out). • Turn on and select the TF card play mode，
symbol SD lit， This product can read TF card stored files according to the order of play • Other
functional operations are the same as the Bluetooth mode.
5) USB mode: USB sound box function: Push power switch to ON， Connect the computer and the
sound box with the MICRO USB Android mobile data line, The speaker issued a "Ding Dong" sound
mean that the connection is successful， at this time the computer will transmit the audio signal to
the sound box through the data line. USB copy: push TF card into card slot， push power switch to
ON， Connect the computer and the sound box with the MICRO USB Android mobile data line, The
music files can be copied to the TF card at this time NOTE: This product is only attached to a charge
connection line, not data line.
6. Battery indicate: • Full battery quantity of electricity • Remaining 3/4 battery quantity electricity
• Remaining 1/2 battery quantity electricity • Display and Short line scintillation battery -
Remaining 1/4 quantity electricity， remind needs to recharge the product as soon as possible.
-03-