CORBERO CF2P K 400 NF Manual Del Usuario página 9

Frigorífico
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
Cleaning procedure
Cautions
Always disconnect
the power plug.
Back of refrigerator
Adjust the regulate feet and let it hang in the
air, then moving it.
Clean the dust at back and ground
Attention
Do not stretch hands to the bottom
Wipe off any oil on the
surfaces
soak a soft cloth in warm
water or dish abluent.
wiper off all abluent.
Inspection after cleaning
Caution
Check power line and plug
If the power line and plug damaged.
Dust on the plug.
Unusual heat of plug.
If the socket become flexible.
If the plug inserted incompletely.
If the power line and plug are damaged or
Sticked dust, it would cause electric shock or
fire.
Replugging in the power at least
10 minutes later.
10 minutes
6
Common phenomena trouble shooting
Instruction trouble shooting
the following cases are not malfunction. please check according to below steps
before asking for service
No current; abnormal voltage; fusing; out in the plus uneffectively ,check the plug and fuse.
Not efficient
The temperature adjustment knob is in the 0 position;
space around the refrigerator is not enough;
the door has been opened too frequently and too long;
the refrigerator is exposed to the sunlight directly or place near some heat sources;
there is no space between foods;
there are hot foods inside the case.
Please read the points of attention, keep away from the heat source, do not open the door frequently ,
put the hot foods in the case after it is cooled down. adjust the knob to 5 to 6 position.
Foods frozen in the refrigerator compartment or chilled case.
The temperature knob is in 7 position;
foods containing rich water and freezed easily are near the rear wall.troubles of sensors or controls,
adjust the knob to 3 position
Noises
the refrigerator is not located firmly;
the refrigerator has been struck to other objects;
the copper pipe has been struck each other in the mechanical room;
locate the refrigerator at a firm base and separate the copper pipe from other objects in the
mechanical room
Compressor can not stop working automatically
store too much foods at one setting;
open the door frequently or too long;
the temperature knob is in 7 position;
Foods should be stored in separated batches, do not store too much food at one setting;
Decrease the frequence of opening the door and shorten the time of opening the door;
Compressor cannot start
turning on the power, the refrigerator cannot work exceeding 30seconds.pullthe plug down at once.
Reinsert the plug, if the refrigerator still do not work. Please contact with service department.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido