Quick Tour - Marmitek MT20 Mini Timer Modo De Empleo

QUICK TOUR

Let's quickly review the functions of each part of the keyboard (you can go to
SETTING UP THE MINI TIMER for a step by step tutorial if you prefer). Referring to the
diagram below and the cutaway sections that follow, you will see that the keyboard
on the Mini Timer consists of 7 basic areas.
3. Time/dim Adjust Rocker. This is used to set the time of the clock and
the time you want to set for each programmed event. Also brightens/dims
Lamp and Wall Switch Modules, after selecting desired number button.
4. Alarm. The number 1 button also sets the time for the internal alarm
buzzer.
5. All Units Off Button. Instantly turns Off ALL Modules including Appliance
Modules.
6. Mode Button cycles through Daily, Once, and Security Modes.
10
1. Mode Switch. This is used to select whether you want to set or
review a timed event, change the Housecode, or set the clock. See
Changing the Housecode to change the Housecode.
2. ON/OFF Buttons. There are 4 sets of ON/OFF
buttons. They let you turn Modules 1 through 4
(or 5 through 8) on and off instantly by pressing
either the ON or OFF button.
In the "Prog Set/Review" mode these button are
used to set on and off times for the selected
number (1 to 4 or 5 to 8).
© MARMITEK