Product Description; Helpful Hints - HAEGER Popper Instrucciones De Uso

Product Description

1. Top cover
2. Hole for corn kernels
3. Popping chamber (hot air)
4. Measuring cap
5. Main body
6. Power ON/OFF button
Instructions for use
IMPORTANT: NEVER underfill or overfill
the measuring cap with corn kernels.
Insufficient filling of the lid can cause
fewer kernels to turn into popcorn.
Overfilling can cause the popcorn to burn
and smoke and get stuck in the popcorn
chamber.
1. Completely fill the measuring cap with
your favourite corn kernels without
surpassing the level.
2. Pour the entire measuring cap of corn
kernels through the hole in the top of
the unit until the cap is empty (fig. A).
3. Put the measuring cap back in the top
cover.
4. Place a bowl or plate underneath the
popcorn outlet to allow popcorn to fill
the bowl (fig. B).
5. Plug the power cable to an electrical
outlet and switch the power button to
position "I" (fig. C).
6. In 2 or 3 minutes the popcorn will be
ready. When all the corn kernels turn
into popcorn, turn the unit OFF.
7. If there is any popcorn left in the
popcorn maker, unplug the appliance
and remove the remaining popcorn.
Be careful with the body and lid of the
popcorn maker as they have hot
surfaces. Let the unit cool down for at
least 2 minutes before removing the
transparent cover. We recommend
that oven mitts be used to remove the
cover. Due to variations in cores, not
all cores may have popped.
8. Eat the popcorn as is or top it with your
favourite topping such as: salt and
pepper, seasoned salt, butter, caramel
or Parmesan cheese.

Helpful hints

•
This product uses hot air circulation in
the popping chamber to pop the
kernels. To avoid damaged to your
popcorn maker, never add butter, oil
or any other substance to the popping
chamber.
•
Never use microwave popcorn in your
popcorn maker.
•
Use only fresh popcorn kernels. Old or
stale kernels may cause scorching or
smoking during operation.
•
Take care when selecting the bowl for
catching your popcorn.
− A metal bowl may become hot,
exercise caution when moving the
bowl.
− If using a plastic bowl, ensure it can
withstand the heated air which flows
from the popcorn maker while in
use.
− Use a bowl that is large enough and
fits under the popcorn chute. Some
bowls may not fit because of the
wheels. If needed, put a small cup or
smaller bowl under the bowl
intended to collect the popcorn to
lift the bowl up to the height of the
chute.
IMPORTANT ALWAYS
Allow the machine 15 minutes to cool
down before using the unit again. Then
the machine will not get overheated and
will work effectively.
3