Preparation Before Use; Maintenance - THERMEx STERIMEX LARGE Manual De Instrucciones

50 THERMEX StERIMEx LARGE

PREPARATION BEFORE USE

Always clean and dry all units before putting them in Sterimex.
Never place units in Sterimex that are not suitable for min. 75 ° C. Failure to do so may result in damage to the units
due to the high heat in the cabin.

MAINTENANCE

Use Sterimex on a regular basis. If Sterimex is used at least once a week, the cabinet will be kept germ-free.
NOtE: Disconnect the power from Sterimex before starting cleaning.
Clean Sterimex regularly, both inside and out. this is done with a damp cloth, and possibly a few drops of detergent. Afterwards, wipe the cleaned
area with a tea towel to remove any remaining moisture. Be careful not to damage Sterimex during cleaning. especially the UV and heating ele-
ments are fragile and should not be cleaned directly.
... ...
M 710212200212052021