Accessories; Removing The Handle - LG GM78BGS Manual Del Propietário

global_main.book.book Page 13 Wednesday, August 3, 2022 1:23 PM

Accessories

*1 This feature is only available on some models.
*1
Spanner A
a
*1
b Spanner B
*1
c C-Clip (Snap Ring)
d Water Filter
*1
e Water Tube
*1
f Tube Connector
Tube Connector and Valve
g

Removing the Handle

When moving the appliance through a narrow
opening, removing the doors is preferred.
The appearance of the handles may vary from what
is shown.
These instructions are for models which ship with
the handles assembled. For models shipped with
the handles disassembled, follow the instructions
included in the handle package.
• Tools Needed
- Units shipped with assembled handles:
2.38 mm (3/32 in.), 3.18 mm (1/8 in.), 6.35 mm
(1/4 in.) Allen wrenches
- Units shipped with disassembled handles:
2.38 mm (3/32 in.), 6.35 mm (1/4 in.) Allen
wrenches
CAUTION
• When removing or refitting the appliance
handle, grasp the handle firmly to avoid
dropping it.
• Make sure that there is not a gap between the
Removing the Fridge Handle
1
2
Removing the Freezer Drawer
*1
Handle
1
2
INSTALLATION
door and handle after assembling the handle.
Loosen the set screws
a
in.) Allen wrench and remove the handle.
Loosen the mounting fasteners
to the refrigerator door and handle using a
6.35 mm (1/4 in.) Allen wrench, and remove the
mounting fasteners.
Loosen the set screws
a
side of the handle with a 3.18 mm (1/8 in.) Allen
wrench and remove the handle.
• For models shipped with the handles
disassembled, use a 2.38 mm (3/32 in.) Allen
wrench.
Loosen the mounting fasteners
mm (1/4 in.) Allen wrench, and remove the
mounting fasteners.
13
with a 2.38 mm (3/32
that connect
b
located on the lower
with a 6.35
b