Publicidad
PL
Rysunek produktu
① Wskaźnik LED funkcji ANC
② Przycisk włączania/wyłączania funkcji
ANC
③ Gniazdo audio 3,5 mm
④ Przycisk wielofunkcyjny
⑤ Wskaźnik LED
⑥ Głośność +/Dalej
⑦ Głośność -/Wstecz
⑧ Mikrofon
⑨ Port micro USB do ładowania
SR
Šematski prikaz proizvoda
① ANC LED indikator
② ANC ON / OFF dugme
③ 3,5mm audio port
④ Multifunkcionalno dugme
⑤ LED indikator
⑥ Ton + / Dalje
⑦ Ton - / Prethodno
⑧ Mikrofon
⑨ Mikro USB ulaz za punjenje
All manuals and user guides at all-guides.com
RO
Diagrama produsului
① Indicator LED ANC
② Buton PORNIT/OPRIT ANC
③ Port audio 3,5 mm
④ Buton multifuncțional
⑤ Indicator LED
⑥ Volum + / Următor
⑦ Volum - / Anterior
⑧ Microfon
⑨ Port de încărcare micro USB
SL
Slika izdelka
① Indikator LED ANC
② Gumb za VKLOP/IZKLOP ANC
③ 3,5-mm vrata za zvok
④ Večfunkcijska tipka
⑤ Indikator LED
⑥ Povečanje glasnosti/naprej
⑦ Zmanjšanje glasnosti/nazaj
⑧ Mikrofon
⑨ Priključek za napajanje micro USB
EN
Package Contents
• 1 x TaoTronics Active Noise Cancelling Wireless Stereo Headphones
• 1 x USB Charging Cable
• 1 x 3.5mm Audio Cable
• 1 x Carrying Case
• 1 x User Guide
How to Use
1. Charging
1) Connect the charging port to any USB charging adapter or active computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns blue.
Note:
• Make sure the battery is fully charged before putting the headphones away for storage.
• Charge the headphones at least once every 3 months when not using for a long time.
2. Pairing
1) Make sure the headphones and your Bluetooth
(within 3 feet / 1 meter).
2) The rst time you use the headphones, press and hold the Multifunction Button
until the LED indicator ashes red and blue alternately. Now the headphones are
in pairing mode.
3) Activate Bluetooth
on your phone and search for nearby Bluetooth
®
Find "TaoTronics TT-BH22" in the search results and connect. Once connected, the
LED indicator will ash blue.
Note：
If the headphones cannot pair with your Bluetooth device, clear the pairing history
as below:
1. Turn on the Bluetooth headphones and bring it into pairing mode, the indicator
will ash red and blue alternatively.
2. Press and hold the Volume + / - Buttons at the same time for 7 seconds until the
LED indicator ashes purple once and 2 beep sounds are heard.
3. You can just pair the headphones just like when they are new.
device are next to each other
®
connections.
®
01
Publicidad
