Corsair XENEON 32QHD240 Manual Del Usuario página 19

OPERATION
CORSAIR XENEON 32QHD240 Gaming Monitor FAQ
QUESTION
Power LED not on
No image on screen
Image too light/dark
Video signal not supported
ENGLISH
ANSWER
Press the power button on the back of your monitor to check if it is set to ON.
Check to see if the power cable is fully plugged into the monitor as well
as the power adapter.
Check Power LED toggle in OSD System Setting Menu is toggled on.
Check to see if your monitor is on.
Check to see if the video cable is properly connected to the monitor as well
as the source device.
Check the quality of the video cable and ensure that it isn't damaged. Avoid
low quality video cables and extensions.
Check which video source input your monitor is set to (if the Auto Source
feature is disabled in OSD).
Connect another source device to test monitor video input.
Connect the source device to another available monitor to test video output.
Avoid hot-plugging the monitor. Have the monitor connected to the source
prior to powering up the source device.
Adjust the brightness/gamma/contrast settings via the OSD.
Reset the monitor to factory settings.
Check the video output settings of the source device. Supported input
resolutions for the CORSAIR XENEON 32QHD240 Gaming Monitor are:
RESOLUTION REFRESH RATE
640x480 60, 67, 72, 75Hz
800x600 56, 60, 72, 75Hz
1024x768 60, 70, 75Hz
1280x1024 60, 75Hz
1440x900 60Hz
1680x1050 60Hz
60Hz
1920x1080
144, 165Hz (DP, Type-C)
60, 120, 144Hz
2560x1440
165, 180, 240Hz (DP, Type-C)
3840x2160 30, 60Hz (for Downscaled Console Support)
18