Wearing The Device - ARVA NEO BT PRO Guía De Utilización

sition to turn the device on. The selector is locked properly
when you hear it click into place, indicating that the selector
has been moved to the SEND position.
The device carries out an automatic test during the start-up
phase to check the main functions. Be sure to verify that the
auto-test is running correctly and pay close attention to any
error messages appearing on the screen. The device should
display "On", then the software version installed, and finally
"OK".
The device then displays the remaining
battery life. We advise you to replace the
batteries as soon as the battery life indica-
tor drops below 50%. Press and hold the
marking button in transmit mode to check
the battery life at any time.
7
Once the start-up phase is complete, the device prompts the
user to carry out a GROUP CHECK (see paragraph 3.1/ GROUP
AND FREQUENCY TEST) and then automatically switches to
transmit mode without any further action from the user. A
blinking arrow then appears at the top of the screen to con-
firm that the transceiver is in transmit mode.

2.2/ WEARING THE DEVICE

Make sure that the carabiner of the elastic attachment lan-
yard is properly connected to the waist belt of the holster (2
positions available left and right), then position the device in
the holster with the screen facing your body and fasten the
buckle of the holster. The NEO BT PRO should always be worn
over the base layer of clothing closest to your body.
EN