Scott Living HDSLFP48L-3A Instrucciones De Montaje página 18

Assembly (continued)
27
Connecting ember bed cable to heater
□
Fully plug the USB connector of the ember bed (E) into the back port of heater (A).
28
Inserting the glass
□
Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A). If
needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with the
top of both upright arms (B and C).
The warning labels on
glass should face outward.
A
E
I
C
A
I
B
A