Scott Living HDSLFP54W-4A Instrucciones De Montaje página 14

Assembly (continued)
19
Connecting ember bed cable to heater
□
Fully plug the USB connector of the ember bed (E) into the back port of heater (A).
20
Inserting the glass
□
Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A).
If needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with
the top of both upright arms (B and C).
The warning labels on glass
should face outward
A
E
I
C
A
I
B
A