Better Homes and Gardens BHF1025004001 Manual De Instrucciones página 10

Nylon strap
Wall
Metal bracket
Tools required (not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and
10. Ask for assistance to stand the assembled unit upright and position it at the desired location against a
wall. If necessary, adjust the Floor Levelers at the bottom of the Lower Side Frames (C) to level the
unit.
11. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent
the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not
earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
12. The unit is now ready for use.
Assembly Instructions
Short screw
Long screw
1/8" drill bit.
10
Wooden stud
Wall
C
Floor leveler