Please read completely through the instructions and verify that all listed parts and hardware are
present before beginning assembly.
A- Shelf
(Qty. 5)
C- Lower Side Frame
(Qty. 2)
E- Metal Bar
(Qty. 4)
(1) 1/4" x 20 mm Bolt
(Qty. 11+1 extra)
(4) M4 x 42 mm Screw
(Qty. 20+1 extra)
Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in
Parts and Hardware List
(2) Lock Washer
(Qty. 6+1 extra)
Hex Wrench
(Qty. 1)
drill bit.
4
B- Upper Side Frame
(Qty. 2)
D- Back Stretcher
(Qty. 1)
F- Assembly Jig
(Qty. 1)
(3) Flat Washer
(Qty. 6+1 extra)
Tipping Restraint Hardware Kit (Qty. 1)
(Included in plastic bag)