Parts & Features; Operation Instructions; Temperature Control - Commercial Cool CCRR4ALB Manual Del Usuario

SET UP & USE
PARTS & FEATURES
Interior Light
Temperature
Control
Full Width
Glass Shelves
Crisper
Adjustable
Leveling Legs

OPERATION INSTRUCTIONS

TEMPERATURE CONTROL

NOTE: · If the refrigerator has been placed in a horizontal or tilted position for any period of time,
wait 24 hours before plugging the unit in.
• The settings of the temperature control are "0, 1, 2, 3, 4, 5" Adjust the
temperature control to the setting that best suits your needs. The setting of "3"
should be appropriate for home or office use.
• Turning the temperature to "0" position will shut off the cooling cycle, but does
not turn off the electrical power to the unit.
NOTE: · Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to
operate properly if restarted too quickly.
· If the ambient temperature is too high, the refrigerator may not reach the desired target
temperature.
· Large amounts of food will lower the cooling efficiency of the appliance.
· Do not place food items on the air outlet. Leave space for airflow.
· If you choose to change the thermostat setting, adjust thermostat control one increment
at a time. Allow several hours for temperature to stabilize between adjustments.
STARTING YOUR NEW REFRIGERATOR
After cleaning your refrigerator thoroughly. Wipe the outside with a soft dry cloth, the
interior with a clean moist cloth.
1. Insert the power supply cord into the socket.
2. Turn the thermostat dial to an initial setting of "5" for 15-20 minutes.
NOTE: · As the door gets pressed in during shipping, the gasket may have to be reset. This is done
to prevent the cool refrigerated air from escaping. If there is a gap between the door
gasket and the cabinet, set the gasket by gently pulling it out of the seal gap.
Page 8
3 Full-width
door bins