universalblue UCCBLACK90-19 Manual De Instrucciones página 23

 Attach the discharge conduit to the air outlet adapter and use
ST3x6 screws (2) to hold both parts.
 Drill 4 holes in the wall and place the 4 plasterboard
moorings (10x45 mm). Use ST5x45 screws (2) to hold the
top of the hood body, then use ST4.2x30 screws (2) to hold
the bottom of the hood.
 Drill 2 holes in the wall and place 2 plasterboard moorings.
Use (2) ST2.9x14 to fix the chimney cover I above, use (2)
M3x6 to fix the chimney cover I below.
 Carefully slide the top of the decorative fireplace into the
bottom of the fireplace. Carefully place the bottom of the
decorative fireplace in the built in area of the top of the hood
body. Drill 2 holes in the wall and place 2 plasterboard
moorings (10x45 mm). Attach the chimney mounting bracket
to the wall using (2) ST4.2X30 screw. Level the hood and
hold the chimney with 2 of the provided M4x6 screws.
23