Donner DEK-610P Manual Del Usuario página 11

when the power is on. It will jump to next menu automatically everytime you pressed the
【FUNCTION MENU】 button. The option was entered into again later will be same the
option was exited last time.
• The parameters can be setted by pressing 【-/+】buttons. The concrete function
options and parameters range are as below list.
NO.
Adjustment content
1
Metronome type
2 Tune
3 Reverbtype
4 Reverb depth
5 Chorus type
6 Chorus depth
Notice: If there is no any setting operation in 3 seconds by pressing【FUNCTION MENU
】,【-/+】buttons, the system will exit function menu state.
1.Metronome type setting
Pressing【FUNCTION MENU】button repeatedly,"Beat"will display in LCD temporarily
after metronome type menu was choosed. You can select beat type by pressing 【-/+】
buttons now.
2.Reverb type setting 2.Reverb type setting
• Pressing 【FUNCTION MENU】button repeatedly, "004 Bev Type"will display in LCD
screen temporarily after reverb type setting menu was choosed. You can select reverb
type by pressing 【-/+】buttons now. This electronic keyboard has pre-setted 10 kinds
of reverb type in total.
• Pressing【-/+】buttons at the same time, the reverb type will recover to pre-setted
value:004.
3.Reverb depth setting
• Pressing【FUNCTION MENU】button repeatedly, " XXX Bev Lev' will display in LCD
screen temporarily after reverb depth setting menu was choosed. You can select depth
type by pressing【-/+】buttons now,range:0~127.
• Pressing 【-/+】buttons at the same time, the reverb depth will cover to pre-setted
value.
4.Chorus type setting
• Pressing 【FUNCTION MENU】buttons repeatedly, "003 Chr Type"will display in LCD
screen temporarily after chorus type setting menu was choosed. You can choose chorus
type by pressing 【-/+】buttons now, this electronic keyboard has pre-setted 8 kinds of
chorus type in total.
• Pressing【-/+】buttons at the same time, the chorus type will recover to pre-setted
value:003.
5.Chorus depth setting
• Pressing【FUNCTION MENU】button repeatedly ,"XXX Chr Lev"will display in LCD
screen temporarily after chorus depth setting menu was choosed. You can choose
chorus depth by pressing 【-/+】buttons now,range:0~127.
• Pressing【-/+】buttons at the same time, the chorus depth will recover to pre-setted
value.
LCD Display Adjustment range
XX Beat 0,2 ...... 9
XXX Tune -50 ...... - +50
XXX Revb Type 1~10
XXX Revb Lev 0~127
XXX Chr Type 1~8
XXX Chor Lev 0~127
08