Pitch Bend - Donner DEK-610P Manual Del Usuario

O.T.S. setting contains following parameters:
• Tone channel open and close(Right hand, Left hand)
• Tone NO.(Right hand, Left hand)
• Tone volume(Right hand, Left hand)
• Tone reverb effect volume(Right hand, Left hand)
• Tone chorus effect volume(Right hand, Left hand)
State memory
• This instrument has registration memory function, it can be used for saving your
mostfavorite setting as to the setting can be tuned out easily and promptly when you
need it.
• You can make loop selection in 4 groups of memory groups by pressing 【 BANK】
button, "MEN BACK" 01-04 displays in LCD.
• Pressing and holding 【MEMORY 】 button, then, pressing any button of M1-M4, "01-04
MEN STOR" displays in LCD, the data storage work was executed now(The panel
parameters content that can be stored: Rhythm and their relative function, tone and
effect control)If the panel setting was stored to the memory position that contained
previous data, then, the new setting will cover previous data.
• Tune out stored panel setting: Pressing 【 BANK 】 button to tune out memory group
that had been setted, then, pressing M1-M4 to tune out memory state.

Pitch bend

The pitch bend can add smooth tone change to the performed notes. It is to
rise note by sliding pitch bend wheel upwards with left hand or reduce note
by sliding pitch bend wheel downwards with left hand when you play
keyboard with right hand.
Touch
To open or close 【TOUCH】 by touch function, the default keyboard touch response
function was opened when power is on.
11