Publicidad
Idiomas disponibles
Idiomas disponibles
Install and Use Monitor
On the channel display interface, you can
tap a specific section to enter the respective
single-channel display mode, no matter
whether the AUTO DISPLAY switch is
enabled or disabled.
Mirror Setting
1. Tap MIRROR to enter the submenu.
The currently selected setting will be
highlighted red.
2. Select the camera you are going to set.
CCD-0005559 Rev: 04-29-22
3. Tap to set the camera image rotation
angle as NORMAL (0
FLIP (Horizontal Mirror) or FLIP &
ROTATE (Vertical Mirror).
4. Repeat steps 2 and 3 to set the other
cameras.
Volume Setting
1. Tap VOLUME to enter the submenu.
2. Tap
or
to decrease or increase
the volume of the doorway and/or rear
cameras.
- 24 -
), ROTATE (180
),
o
o
Publicidad
Solución de problemas
