CONNECTION AND OPERATION
Select the operation mode by pressing the MODE buttons. To make changes within a mode use the SET
buttons and press ENTER to confirm.
The following table shows you all the operating modes and the possible settings for each mode.
MODE
DMX CONTROL
d---
A---
r---
G---
MANUAL
b---
u---
FH--
CL--
CC--
AUTO
DE--
CP--
SU--
DMX CONTROL
To control the device using a DMX controller:
-
Select the desired DMX operation mode: 4 or 8 channels as shown in the table above. Use the MODE
and SET button to select the number of channels and press ENTER to confirm the setting..
-
Select the DMX address to control this LED bar with a value between 1 and 512. Use the MODE and SET
button to select the DMX address and press ENTER to confirm the setting.
-
Below are the features of each channel in the different DMX operating modes:
4 channels (d):
CHANNEL
8 channels (A):
CHANNEL
VALUE
FUNCTION
001-512
4 channel DMX control. Value: DMX address
001-512
8 channel DMX control. Value: DMX address
000-255
Create color by mixing intensities of red (r---), green (G---), blue (b---)
000-255
000-255
000-255
01-99
Strobe light. Value: speed (01: slow, 99: very fast)
01-08
Preset colors. Value: brightness (01: min., 08: max.)
01-99
Effects 1. Value: speed (01: slow, 99: very fast)
01-99
Effects 2. Value: speed (01: slow, 99: very fast)
01-99
Effects 3. Value: speed (01: slow, 99: very fast)
01-09
Sound activated. Value: microhone sensitivity (01: min., 09: max.)
VALUE
CH1
000-255
CH2
000-255
CH3
000-255
CH4
000-255
VALUE
CH1
000-255
CH2
000-255
CH3
000-255
CH4
000-255
CH5
000-255
CH6
000-255
000-050
051-100
101-150
CH7
151-200
201-250
251-255
CH8
000-255
and white (u---).
Value: color intensity (00: minimum, 255: maximum
FUNCTION
Red intensity
Green intensity
Blue intensity
White intensity
FUNCTION
Overall light intensity
Red intensity
Green intensity
Blue intensity
White intensity
RGB strobe speed
No effect
Effect 1
Effect 2
Effect 3
Effect 4
Sound activated
Speed, from slow to fast
- 3 -
EN