Publicidad
Idiomas disponibles
Idiomas disponibles
GX-100/150 ABS MOLDED LOUDSPEAKERS
INTRODUCTION:
Congratulations on your purchase of a GX-SERIES trapezoidal loudspeak-
er, engineered & manufactured by Gemini Sound Products. The Gemini GX
speaker range includes the very latest technology in lightweight ABS
design. Available in 8", 10", 12", and 15" passive or powered units, the new
GX-SERIES is a superb addition to Gemini's comprehensive speaker line.
The GX-100 and 150 are backed by a 1 year limited warranty* and are sure
to provide years of reliable service with the proper care and maintenance.
FEATURES:
GX-150 Powered Professional 8" Two Way ABS Loudspeaker
- 8" Aluminum die-cast woofer with high temperature voice coil
- Compression driver with 1.25" titanium diaphragm
- Durable black ABS plastic molded shell & full metal grille
- 100w RMS, 250w peak power amplifier
- Frequency response: 65 Hz - 20 KHz
- Power & clip LEDs
- XLR Mic input with rotary volume control
- XLR and RCA Line inputs
- XLR Line output (for linking multiple speakers)
- Rotary Master volume control
- Stand mounting socket and rigging points
- Rubber feet and stacking grooves
- Mounting eyelets included
GX-100 Professional 8" Two Way Passive ABS Loudspeaker
- 8" Aluminum die-cast woofer with high temperature voice coil
- Compression driver with 1.25" titanium diaphragm
- Durable black ABS plastic molded shell & full metal grille
- 100w RMS, 250w peak power handling
- Frequency response: 65 Hz - 20 KHz
- Speakon input and output (for linking multiple speakers)
- Stand mounting socket and rigging points
- Rubber feet and stacking grooves
- Mounting eyelets included
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qual-
ified Gemini Sound Products service technician. In the USA: If you experi-
ence problems with this unit, please call 1 (732) 738-9003 for Gemini
Customer Service. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CON-
TROLS OR SWITCHES.
LINE VOLTAGE SELECTION (GX-150 only):
The GEMINI GX-150 speakers are a dual voltage unit operating at 115 or
230 volts. Be sure to set the proper voltage before operating:
1. Place the head of a screwdriver in the center of the V
switch found on the rear panel.
2. Slide the switch to 115 or 230 volts.
3. Do not force or twist the switch. Excessive force may cause damage. If
the switch does not move smoothly, contact a qualified technician.
CONNECTIONS:
1. Make sure ALL your equipment is completely OFF and lower ALL VOL-
UME, LEVEL, & GAIN controls and before connecting the speaker.
1. For the GX-100 passive speaker, use a S
PEAKON
O
to the S
I
J
(1) on the rear of the speaker.
UTPUT
PEAKON
NPUT
ACK
2. For the GX-100 passive speaker, you may C
by running a Speakon Cable from one speaker cabinet to another. The abil-
ity to do this may depend on the output power and load conditions of your
amplifier, as Chain-Linking speakers in this fashion will affect the overall
impedance.
3. For the GX-150 active speaker, the amplifier is built into the rear of the
speaker cabinet. This means that you can connect a Microphone directly to
the XLR M
I
(7), or you can connect a balanced Line Level device to
IC
NPUT
the XLR L
(5). Alternatively, you may also connect a Line Level
I
INE
NPUT
device to the RCA L
I
(6)
INE
NPUTS
3. For the GX-150 active speaker, you may Chain-Link additional speakers
by running an XLR cable from the XLR L
O
INE
inet to the XLR L
I
(5) of another speaker. Since each cabinet is
INE
NPUT
amplified independantly, this process can be repeated indefinitely.
OPERATION:
GX-100:
1. First turn on your M
or other signal source.
IXER
2. Then turn on your A
and increase the V
MPLIFIER
as recommended by the A
'
owner manual.
MPLIFIER
S
3. Start playing a typical audio program through the system, and adjust the
volume from the sound source to a reasonable listening level.
GX-150:
1. First turn on your audio source (or connect a Microphone), then turn
the Speaker's P
(3) to the 'ON' position. ,The P
S
OWER
WITCH
will light. Start playing a typical audio program through the system, and
adjust the volume from the sound source to a reasonable listening level.
<5>
2. Use the A
the speaker. If the speaker is overloaded, the C
red. If the C
A
V
MPLIFIER
audio source to avoid damaging the speaker or its built in amplifier.
3. Adjust the volume of a connected microphone by using the M
(9).
C
ONTROL
NOTE: I
T IS POSSIBLE TO MOUNT THE
BY INSERTING THE STAND INTO THE
ING THE SOCKET USING THE
SPEAKER IS TO USE THE
AVAILABLE SEPARATELY
ON TOP OF ONE ANOTHER WITHIN THE
TOP PORTION OF THE SPEAKER
SPECIFICATIONS:
(4)
S
OLTAGE
ELECTOR
Woofer Magnet Weight:
Woofer Voice Coil:
Woofer Impedance:
Woofer RMS Wattage:
Woofer Peak Wattage:
Compression Driver Magnet Weight: 23 Oz.
Compression Driver Diaphram Size: 32 mm
Compression Driver RMS Wattage:
from your A
C
ABLE
MPLIFIER
Compression Driver Peak Wattage:
-L
additional speakers
HAIN
INK
Crossover Specification:
Nominal Horn Dispertion:
Sensitivity:
Frequency Response:
Type of Amplifier:
Stand Mount Hole:
Cabinet Weight:
Shipping Weight:
(8) of one speaker cab-
UTPUT
Power Requirements:
Cabinet Dimensions:
or G
control
Specifications and design are subject to change without notice for purpose
OLUME
AIN
of improvement.
*The stated warranty does not affect statutory local warranties.
LED (11)
OWER
V
C
(10) control to adjust the volume of
MPLIFIER
OLUME
ONTROL
LED (12) will illuminate
LIP
LED (12) frequently illuminates red, then lower the
LIP
(10) control, or lower the volume from the
C
OLUME
ONTROL
GX
SERIES SPEAKERS ON A SPEAKER STAND
S
M
S
TAND
OUNTING
OCKET
L
P
(13). A
OCKING
IN
NOTHER WAY TO MOUNT THE
S
R
P
(14). S
PEAKER
IGGING
OINTS
. T
R
F
(16)
HE
UBBER
EET
ARE FOR STACKING THE SPEAKERS
S
G
(17)
TACKING
ROOVES
.
GX-100
41 Oz
49.5 mm
8 Ohms
100 Watts
250 Watts
60 Watts
120 Watts
3 Khz, 12 dB/Oct.
40° X 90°
97 dB/m/w
65-20 Khz
N/A
25 mm
8 lbs (3.7 kg)
10 lbs (4.7 kg)
n/a
110/230VAC / 60~50Hz
405x223x293/217mm (16x8.5x11.5/8.5in)
V
IC
OLUME
(15)
-
AND TIGHTEN
PEAKER STANDS ARE
LOCATED ON THE
GX-150
41 Oz
49.5 mm
4 Ohms
100 Watts
250 Watts
23 Oz.
32 mm
60 Watts
120 Watts
3 Khz, 12 dB/Oct
40° X 90°
97 dB/m/w
65-20 Khz
MONO
25 mm
11 lbs (4.9 kg)
13 lbs (5.9 kg)
Publicidad
