Publicidad
Idiomas disponibles
Idiomas disponibles
Only use the power supply unit provided or an identical
substitute power supply unit supplied by Hettich.
• EC conformity will no longer apply if non-genuine re-
placement parts are used.
• Components may only be replaced by a properly trained
person.
• Have any damages repaired immediately by a qualified,
skilled person.
• Order replacement parts from your dealer or furniture
supplier.
2.3 Disposal
Dispose of your end of life appliance in accordance with
national / international regulations.
2.4 Marking and technical specifications
Power supply unit: ICP36-240-1500
1. 100...240 V 50/60 Hz = supply voltage
2. 24 V DC SELV = output voltage (safety extra low vol-
tage)
3. 36 W = rated power
4. = protection class II (protective insulation)
Easys automatic drive and feed mechanism
5. = protection class III
6. 1.5 V = power consumption at maximum load
7. Average operating efficiency: ≥ 87.5%
Efficiency at low load (10%) ≥ 83%
Power consumption at low load ≤ 0.1W"
The A-rated emission sound pressure level at workstations
does not exceed 70 dB(A).
2.5 Commissioning
Commissioning, assembly/installation and servicing work
must only be carried out by trained, specialist personnel.
Zero-maintenance.
2.6 Potential misuse
This machine must only be operated if it is in proper
Hettich Marketing- und Vertriebs GmbH & Co. KG · Gerhard-Lüking-Straße 10 · 32602 Vlotho · Telefon +49 5733 798-0 · www.hettich.com
Technik für Möbel
technical working order. In the event of faults in the
power supply and/or damage to the electrical equipment,
the machine must be immediately disconnected from the
power supply. Any identified faults and damages must be
immediately rectified.
The machine must not be modified or otherwise changed
in any way without prior consultation with Hettich or
the type approval and EU Declaration of Conformity will
become null and void.
Safety components must not be rendered ineffective.
39
Publicidad
