Cleaning And Maintenance - Silver Style FS-IRC104 Manual De Instrucciones

CLEANING AND MAINTENANCE

After each use, turn off the unit and unplug it. Allow it to cool before cleaning.
Never immerse the unit or its cord in water or any other liquid. Risk of electric
shock.
Wipe the surface of the cooktop with a soft cloth. If necessary, you can use a
specific cleaner for induction cookers.
Never use abrasive or flammable products to clean the cooktop.
Store the device in a dry place.
TROUBLESHOOTING
Symptoms
After
connecting
the power
and pressing
the power
key, the
appliance has
no response.
Heating being
interrupted in
normal use
and a Beep
will be heard.
No operation
during the
heating being
in use.
Error codes
occur.
Check points
Is the electricity in suspension ?
Is the fuse broken down ?
Is the plug connected firmly ?
Incomptatible cookware or no
cookware is used ?
Is the cookware not considerably
placed from the center of the
heating zone ?
Is the cookware being heated but
continually being removed ?
Is the cookware empty or the
temperature too high ?
Is the air intake/exhaust vent
clogged or dirt has accumulated ?
Is the cooker working over 2
hours without any external
instruction ?
E0 Without cookware or
Incompatible cookware used
E1 IGBT sensor open circuit/
short circuit
E2 Internal overheat
E3 Over-voltage
Remedy
Use after resuming the
electricity.
Check the root causes
carefully. If the problem
cannot be fixed, please
contact Service center for
checking and repairing.
Replace compatible
cookware for the induction
cooker.
Place the cookware inside
the heating zone.
.
Please check whether the
appliance is being misused.
Remove the stuff clogging
the air intake/exhaust
vent.
Operate the appliance
again after cooling down.
Reset cooking modes or
use timer function.
When showing error signal
E0, E2 and E6, please
check whether the
cookware is not suitable or
switch on the appliance
again after it is cooled
down naturally.When
showing E1, E3-E5, please