Publicidad
Idiomas disponibles
Idiomas disponibles
For the colour of your display light, you can choose from different options. Select the desired option with
the 'Colour mode' button and the arrow buttons. (The actual colours may differ from the description.) In
standby, the colour red is shown.
1. PERFORMANCE BASED COLOURS: from WATTS or PULSE RATE
In this mode, the computer automatically sets the display colour according to your performance.
This mode is the default setting after you have switched your device on.
To return to this mode from constant colour, select colour code 'C00' , as described in paragraph 2.
• When the computer receives no pulse signal, it measures your current power in WATTS (W)
and sets the display coulour accordingly.
0-100 W
101-150 W 151-200 W 201-250 W 251-300 W 301-350 W > 350 W
Blue
Aqua
• As soon as the computer receives a pulse signal from the sensors in the sensor bracket or from
an external sensor, it sets the coulour depending on your PULSE RATE.
In HrC mode, the target pulse you have set is taken as MHR (= Max. heart rate =100%). The
display colour depends on which percentage of the MHR your current pulse makes.
(Example: Target pulse = MHR = 160
< 50%
50-57%
MHR
Blue
Aqua
In other training modes, your pulse determines the display colour as follows:
< 110
110-126
BPM
Blue
Aqua
2. CONSTANT COLOUR
You can set a constant colour:
• Press 'Colour mode' button in stand-by mode for 3 seconds until 'C00' appears on the display.
• Select the desired colour code with the 'UP'/'DOWN' buttons according to the following table.
When the desired colour is displayed, press the 'Colour mode' button again for three seconds.
The display then returns to stand-by mode.
C00
C01
(automatic)
Blue
3. LIGHTS OFF
You can switch off the display illumination and train without any visual effects.
• To switch off the display light, press the 'Colour mode' button during your workout.
• To switch it back on, press the button again.
NOTE: After five minutes of user's inactivity, the illumination is switched off automatically, even
when the training is still active.
DISPLAY COLOUR MODES
Green
Yellow
. Current pulse = 120
BPM
66-73%
58-65%
MHR
MHR
Green
Yellow
145-161
127-144
BPM
BPM
Green
Yellow
C02
C03
Aqua
Green
48
Orange
Red
= 75% of MHR => Colour is orange.)
BPM
74-81%
82-89%
MHR
MHR
Orange
Red
162-179
180-196
BPM
BPM
Orange
Red
C04
C05
Yellow
Orange
Purple
≥
90%
MHR
MHR
Purple
≥
197
BPM
BPM
Purple
C06
C07
Red
Purple
Publicidad
