Assembly And Use - Kenwood AT340 Instrucciones

This appliance conforms to
EC Regulation 1935/2004
on materials and articles
intended to come into
contact with food.
Before using for the first time
1 Wash the parts: see 'Cleaning'.
Key
Pushers: large and small
1
Feed tube
2
Lid
3
Shaft
4
Cutting plate
5
Sweeper
6
Body
7
Food outlet
8
Gearbox assembly
9
Extension chute
10
The cutting plates
available
The range of plates listed below
are included in pack and can
be identified by the numbers
marked on the plate as follows:-
Plate No 1 - extra fine shredding.
For parmesan cheese, chocolate
and nuts eg hazelnuts.
Plate No 2 - fine shredding. For
cheese, chocolate, nuts and firm
fruit or vegetables.
Plate No 3 - coarse shredding.
For cheese and firm fruit or
vegetables.
Plate No 4 - thin slice. For
cheese and firm fruit or
vegetables.
Plate No 5 - thick slice. For
cheese and firm fruit or
vegetables
Plate No 6 - thin (julienne style)
chipper. Cuts potatoes for super
thin French Fries and ingredients
for salads, casseroles and stir
fries (eg carrot, courgette and
cucumber)
Plate No 7 - standard chipper.
Cuts potatoes for thin French
Fries and ingredients for
casseroles and dips (eg
cucumber, apple and pear.)

Assembly and use

1 Remove the high speed outlet
cover .
2 Fit the gearbox assembly onto
the mixer
3 Push the desired cutting plate
onto the shaft
is numbered for identification
and the number should be
uppermost when the plate is
pushed onto the shaft.
4 Fit the sweeper onto the shaft
, with the flat surface of the
sweeper against the plate.
For best results when using
the slicing/chipping plates,
the sweeper arm should be
positioned opposite the blade,
as shown below.
5 Attach the lid assembly to the
body, line up the
on the lid with
body. Then turn to
to lock into place
6 Fit the assembled attachment
onto the gearbox and turn to
lock into position
7 If required fit the extension
chute into the food outlet
and push firmly into place
The extension chute MUST be
fitted when the attachment is
used with the KM070/TYPE
KM08/TYPE KCC90 but can
also be used with all other
mixers to direct the food into
the collecting bowl.
8 Connect the mixer to the
power supply and place a
bowl under the food outlet.
9 Choose which feed tube
you want to use. The pusher
contains a smaller feed tube
for processing individual items
or thin ingredients.
3
.
. Each plate
symbol
on the
symbol
.
.
.