Cameo STUDIO PAR 4 G2 Manual De Usuario página 15

CONFIGURING DMX START ADDRESS (DMX Address)
Starting from the main display, press MENU to enter the main menu. Now use
menu item DMX address and confirm with ENTER. Now use the
desired DMX start address and press ENTER to confirm (highest value dependent upon activated
DMX mode).
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
CONFIGURING DMX MODE (DMX Mode)
Starting from the main display, press MENU to enter the main menu. Now use
the menu item DMX Mode and confirm with ENTER. Again use
mode and confirm with ENTER (DMX modes with DMX delay channel are identified with "D"). Ta-
bles with the channel assignment of the different DMX modes can be found in these instructions
under DMX CONTROL.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone 4CH Strobe Macro
Slave
Settings
System Info
14CH Full Access
DMX Address
001 - 512
CLPST4G2 CLPST6G2
DMX Mode
DMX Mode
1CH DIM UC1 1CH DIM UC1
D3CH Macro D3CH Macro
4CH RGBW 4CH Strobe Macro
6CH RGBWAuV
D8CH Strobe D10CH Strobe
10CH Control 12CH Control
D6CH 8Bit
D9CH 8Bit
10CH 16Bit 14CH 16Bit
18CH Full Access
or to select the
or buttons to configure the
or to select
or to select the desired DMX
15