Cameo STUDIO PAR 4 G2 Manual De Usuario página 22

Dimmer = Dimmer curve
Curve
Dimmer = Dimmer response
Response
Calibra- = Colour calibration
tion
Fan Mode = Fan control
Load = Reset settings
Default
Edit = Store all system
Default settings in 3 individual
presets
22
Linear Light intensity increases linearly with DMX
value
Exp (Expo- Light intensity can be finely adjusted at
nential) lower DMX values and broadly adjusted at
higher DMX values
Logarith- Light intensity can be broadly adjusted at
mic lower DMX values and finely adjusted at
higher DMX values
S-curve Light intensity can be finely adjusted at
lower and higher DMX values and broadly
adjusted at medium DMX values
LED Lamp responds abruptly to changes in
DMX value
Halogen Light behaves like a halogen spotlight with
slight brightness changes
User Cali- Individual colour calibration. Cross-mode
bration brightness setting of R, G, B and W (CLP-
ST4G2) or R, G, B, W, A and UV (CLPST6G2)
with values from 0-255
RAW CLPST4G2: R, G, B and W with maximum
value 255
CLPST6G2: R, G, B, W, A and UV with
maximum value 255
Auto Fan Automatic fan speed control
Fan Off Deactivated fan with greatly reduced
brightness
Silent Fan Constantly low fan speed with reduced
brightness, if necessary
Factory Reset to factory settings: Perform reset
with ENTER, cancel with MENU
Preset A Reset to Preset A: Perform reset with
ENTER, cancel with MENU
Preset B Reset to Preset B: Perform reset with
ENTER, cancel with MENU
Preset C Reset to Preset C: Perform reset with
ENTER, cancel with MENU
Preset A Store with ENTER
Preset B Store with ENTER
Preset C Store with ENTER