Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Press the UP button for approx. 2 seconds to initiate
the reception of the radio signal again.
2.
Press the UP button for approx. 2 seconds to initiate
the reception of the radio signal again.
3.
If still no radio signal is received, the time must be set
manually.
11 Manual time setting
1.
Press and hold SET button for approx. 2 seconds to
change to time setting mode.
2.
Digits to be set are flashing.
3.
Press UP or DOWN button to change the value.
4.
Press SET button to confirm and continue to the next
setting.
5.
Settings order: Year > Month > Day > Time zone >
12/24-hour mode > Hours > Minutes
6.
Finally press the SET button to save the settings and
exit the setting mode.
12 Time zone setting
If this weather station is to be used in an area where the
UTC time standard is used (e.g. parts of the UK and Por-
tugal), the time zone can be set manually to -1h UTC. To do
this, follow the next steps.
1.
Press and hold the SET button for about 2 seconds to
switch to time setting mode.
2.
The year digits flash.
3.
Sequence of settings: Year > Month > Day > Time zone
> 12/24 hour mode > Hours > Minutes.
4.
Press the SET button until the time zone setting
flashes.
35 / 80
Publicidad
