Product Overview; Intended Use; Technical Data; Detailed View - STIER SHB-L-4100 Manual De Instrucciones

EN User Guide
4

Product overview

4.1

Intended use

The power tool is designed for hammer drilling in concrete, brick and stone and for light chiselling
work. It is also suitable for drilling without impact in steel, wood, plastic and concrete.
4.2

Technical data

Voltage
Power consumption
Rated speed
Hammer frequency
Clout
Shaft design
Max. Drilling capacity (concrete)
Insulation class
Protection class
Noise level (sound pressure LpA +/- K)
Noise level (power LwA +/- K)
Vibration level
Weight drill
Drill dimensions (L x W x H)
Total weight
Overall dimensions (L x W x H)
Cable length
4.3 Detailed view (see page 2)
No. Description
1 Housing
2 On/Off switch
3 Mode selector switch
4 Rotation selector switch
4.4

Scope of delivery:

• 1 x 1 x STIER hammer drill SHB-L-4100
• - 1 x auxiliary handle
• - 1 x drill chuck guard
• - 1 x carbon brush set
• - 1 x pointed chisel
5

Commissioning

5.1

Before commissioning

• Inspect the drilling site for hidden electrical
cables, gas and water pipes using a cable/pipe
detector before drilling.
• Before connecting to the mains, make sure
that the mains voltage corresponds to the
rating plate.
STIER Industrial GmbH
STIER hammer drill SHB-L-4100 (905315)
230-240 V / 50 Hz
1.500 W
480 bpm
4,100 bpm
12 J
SDS max
40 mm
II
IP 20
93.8 +/- 3 / 95.8 +/- 3 dB(A)
104.8 +/- 3 / 106.8 +/- 3 dB(A)
14.98 +/- 1.5 / 13.02 +/- 1.5 m/s²
7,05 kg
425 x 462 x 268 mm
9,85 kg
370 x 462 x 135 mm
2 m
No. Description
5 Auxiliary handle
6 Mains cable
7 Signal diode*
8 Drill chuck protection
• - 1 x drill bit
• - 1 x grease
• - 1 x ruler for depth adjustment
•
- Instruction manual
Check the integrity of the hammer drill before
each use. Do not work with damaged power tools.
Also check the network cable.
18 EN