Symbols On The Product - Husqvarna 533RS Manual De Usuario

9. Throttle lockout
10. Suspension ring
11. Cylinder cover
12. Starter rope handle
13. Fuel tank
14. Choke control
15. Air filter cover
16. Handlebar
17. Clutch cover
18. Locknut
19. Support flange
20. Support cup
21. Handlebar clamp
22. Operator's manual
23. Transport guard
24. Socket wrench
25. Locking pin
26. Harness
27. Air purge bulb
28. Guard extension
29. Trimmer head
30. Screwdriver

Symbols on the product

WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection and approved eye
protection.
Maximum speed of the output shaft.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
The product can cause objects to eject,
which can cause injury.
1756 - 001 - 08.06.2022
Keep a minimum distance of 15 m / 50 ft.
to persons and animals during operation
of the product.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15
m / 50 ft. distance to persons and animals
during operation of the product.
The arrows shows the limit for the handle
position.
Choke.
Air purge bulb.
Hot surface.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Noise emissions to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 58 .
The rating plate or the laser printing
shows the serial number. yyyy is the
yyyywwxxxx
production year and ww is the pro-
duction week.
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Technical
33