Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
•
Stop the engine, make sure that the cutting
attachment stops and let the product cool down
before you do the maintenance.
•
Disconnect the spark plug cap before you do the
maintenance.
•
The exhaust fumes from the engine contain
carbon monoxide, an odorless, poisonous and very
dangerous gas that can cause death. Do not run the
product indoors or in closed spaces.
•
The exhaust fumes from the engine are hot and can
contain sparks. Do not run the product indoors or
near flammable material.
WARNING:
before you assemble the product.
Introduction
WARNING:
product, you must read and understand the
safety chapter.
WARNING:
cable from the spark plug before you
assemble the product.
To install the handlebar
1. Install the handlebar in the handlebar clamp on the
shaft.
1756 - 001 - 08.06.2022
Read the warning
Assembly
Read the safety chapter
Before you assemble the
Remove the spark plug
•
Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use original accessories.
•
If the maintenance is not done correctly and
regularly, there is an increased risk of injury and
damage to the product.
•
Only do the maintenance as this operator's manual
recommends. Let an approved Husqvarna service
agent do all other servicing.
•
Let an approved Husqvarna service agent do
servicing on the product regularly.
•
Replace damaged, worn or broken parts.
2. Install the protective sleeve.
To install blades and trimmer heads
WARNING:
guard for the blades. See
on page 58 . A defective guard can cause
injury.
WARNING:
with a grass blade, first install the correct
handlebar, blade guard and harness .
WARNING:
blades correctly, it can cause injury.
Only use the approved
Technical data
If you operate the product
If you do not install the the
41