Step 4:
•
Loosen the knob (28).
•
Insert the handlebar post (6) into the cuff on the main device (1).
•
Remove the screws and spring washers from the handlebar post(6). Attach the
handle (7) and the computer mount (49) to the handlebar post (6) with 4 spring
washers, washers and screws (41).
•
Attach the handle cover (10) to the handlebar post (6) and secure with one
screw (54).
•
Slide the tablet/smartphone tray (50) onto the handle (7). Fasten with
the locking plate (52), washer (35) and knob (51).
•
Set the desired handlebar post height and fasten the knob (28).
Caution! Do not adjust the handle bar post past the maximum mark.
SP-SRP-2100-i-IM-INT-V07.indb 30
49
51
35
7
10
54
30
50
52
41
6
28
1
5/4/2021 4:19:35 PM