Biogents BG-Booster CO2 Manual De Instrucciones página 21

Attaching the Pressure Regulator onto the CO
Adjusting the CO
Attaching the pressure reducing regulator
onto the CO gas cylinder:
2
Screw the pressure reducing regulator onto
the CO gas cylinder. Make sure it is tight by
2
using a wrench size 30 or pliers [F3].
Attaching the CO
2
The BG-Booster CO
One end is attached to the CO
nozzle, and the other end is to be attached
to the pressure reducing regulator. Unscrew
the nut on the outlet of the pressure redu-
cing regulator [F4, (1)]. Thread the end of the
CO tube through the nut [F5]. Then fix the
2
end of the CO tube onto the outlet [F6], and
2
re-screw the nut back onto the outlet with a
wrench size 12.
Consumption
2
tube:
includes a CO
2 2
emitter
2
tube.
Gas Cylinder and
2
F3
[1]
F4
F5
F6
21 EN