Balcrank 3331-031 Guía De Servicio Técnico Y Recambio página 7

CONFIGURATION MENU
SETTING UP MEMORIZED PRESETS
You can store up to 10 presets, numbered from "0" to "9" .
When configuring each of them keep in mind that only the
presets that have a non-zero value stored will be visible, so
To set these values follow the procedure:
1. Simultaneously press the "ON" and "SELECT" buttons
until the setup menu is displayed. The "Presets" menu is
displayed on the screen.
3. Press SELECT successively until the preset you wish to
set is displayed.
5. Confirm the selection by pressing the "ON" button, the
display returns to the main menu. Pressing the "ON"
button again exits the configuration menu.
Balcrank™ Corporation · Weaverville, NC 28787 · 800-747-5300 · 800-763 0840 Fax · www.balcrank.com
Fig. 5
you can manage the presets needed. The preset pr-0 is the
only one that cannot be set to zero, so it will always be
visible.
2. Press and hold SELECT until the following screen is
displayed:
4. Use the quantity selection buttons (10, 1, 0.1) to set the
desired value. A long press of these buttons resets the
corresponding digit to zero. If you wish to set more
presets, repeat the process from step 3.
Fig. 6
Fig. 7
R. 07/22 SB3115
EN EN
7