Fitwood KUMPU Manual Del Propietário página 6

Step 1
EN
Place all parts on a carpet or other soft surface, and make sure you have all the necessary parts and
tools. Assembly of this product requires two people.
Step 2
Place wooden dowels on both ends of all of the straight boards. Attach the dowels in their holes on
the board using a hammer. Make sure you can press the dowels all the way down, so they are level
with each other.
10
Step 3
Take all the screw-mounted boards (shelf board no. 2, table top no. 4 and seat board no. 5) and the
other curved headboard and screw them on. Support the table top and seat board during installation.
Step 4
Place the headboard with the connected boards on a carpet with the straight boards facing the
ceiling. Line up the rest of the straight boards (front board no. 1 and backboard no. 3) with the
wooden dowels attached to them and press them firmly into place.
EN
11