Hunter X2 Guia De Inicio Rapido página 7

To factory reset the WAND Module
1. Press and hold the button on the WAND
Module for 5 seconds. "Fdr" (factory default
reset) will appear on the controller LCD.
2. The module LED will turn off.
3. Release the button when the solid amber
LED appears and "done" displays on the
controller LCD.
4. Return to the online setup wizard in your
Hydrawise Controller settings account page to
reconnect the WAND Module to Wi-Fi.
Quick troubleshooting tips
• Move into the Wi-Fi signal range and verify
with your smartphone.
• Verify the correct Wi-Fi network name and
password used.
• Verify the Wi-Fi network is using 2.4 GHz
and not 5 GHz.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG Inc.
and any use of such marks by Hunter Industries is
under license.
hunterindustries.com
Solid LED color:
The WAND Module is waiting for the user to
add Wi-Fi credentials.
The X2 Controller is online and connected to
the Hydrawise server.
Incorrect Wi-Fi password entered or Wi-Fi
network lost.
Flashing LED color:
1 blink, WAND is in Bluetooth ®
pairing mode.
2 blinks, WAND is in "SAP"
(Wi-Fi Direct) mode.
3 blinks, WAND is in "Pbc" router-supported
(WPS push-button) mode.
Refer to the online setup wizard for Wi-Fi
instructions found in your Hydrawise controller
settings account page.
Firmware Update Codes
1. UPd8A - When online, the LED will turn red
and "UPd8A" will appear on the controller
upgrading to the latest X2 Controller firmware.
2. UPd8b - When online, the LED will turn amber
and "UPd8b" will appear on the controller
upgrading to the latest Hydrawise firmware.
3. UPd8C - When online, the LED will stay green
and "UPd8C" will appear on the controller
upgrading to the latest Wi-Fi firmware.
Product Reset
7