Care And Maintenance; Troubleshooting; Warranty - Harbor Breeze WL131MBK Manual Del Usuario

ASSEMBLY INSTRUCTIONS
11. After completing installation, caulk mounting
surface of fixture (A) with silicone weather
sealant (not included).
WARNING:
surface with silicone weather sealant may result
in water damage in outlet box, which may
cause electrical malfunction or electrical shock.

CARE AND MAINTENANCE

Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean shade.
Do not use an abrasive cleaner on shade or fixture.

TROUBLESHOOTING

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
Bulb will not light.
Fuse blows out or
circuit breaker trips.

WARRANTY

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for one
(1) year from the date of purchase. If within this period the product is found to be defective, take a copy
of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase.
The distributor will, at its option, repair, replace or refund the purchase price to the consumer. All costs of
installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation
and specifically excludes liability for direct, incidental or consequential damages, improper packaging of
returned products and acts of God. As some states do not allow exclusions of limitations on an implied
warranty, the above exclusion and limitation may not apply. This warranty gives you specific rights and
you may also have other rights which may vary from state to state.
KHLI2111
Failure to caulk fixture mounting
POSSIBLE CAUSE
1. Bulb is burned out.
2. Power is OFF.
3. Faulty connection.
1. Crossed wires.
2. Power wire is grounding
out.
11
A
CORRECTIVE ACTION
1. Replace bulb.
2. Make sure power supply is ON.
3. Check wiring and all connections.
1. Check wiring.
2. Check all connections.
10
Printed in the USA