iRobot Roomba Combo j7 Guia Del Propietario página 7

Cleaning
• Your robot will automatically explore and clean your home in
neat rows, avoiding obstacles using its front-facing Camera. It
will return to the Charging Station at the end of a cleaning job
and whenever it needs to recharge.
Your robot is able to recognise and avoid
objects. However, it is still recommended that
you remove excess clutter before cleaning.
• To end a job and send the robot back to its Charging Station,
hold the Clean Button down for between two to five (2-5)
seconds. A blue light ring pattern will indicate that the robot is
searching for the Charging Station.
• When your robot detects an especially dirty area, it will engage
Dirt Detect™ mode, moving in a forwards/backwards motion
to clean the area more thoroughly. The Light Ring Indicator will
flash blue.
When your robot senses that its Bin needs to be
emptied, the Light Ring Indicator will illuminate
in a red sweeping motion towards the rear.
Vacuuming
• To start a vacuum-only cleaning job from your robot, empty
the Tank or detach the Mopping Pad before pressing the Clean
Button.
Just press the Clean Button
Tap to Start/Pause/Resume
Hold for two to five (2-5) seconds
to end a job
Mopping
• Your robot is able to both vacuum and mop at the same time.
To start a vacuum and mop cleaning job from your robot, fill the
Tank, attach a Mopping Pad and press the Clean Button.
• When your robot encounters carpet during its
cleaning job, it will lift and tuck the Mopping
Pad away.
• After completing your vacuum and mop
cleaning job, make sure that you empty the Water
Tank and replace the Mopping Pad.
WARNING : To prevent damaging your robot, do not manually stow the
Mopping Pad Plate on the Pad Shelf.
1
Press the Bin Release Button to
remove the Bin.
2
Attach the Mopping Pad.
3
Fill the Tank with water and a
compatible cleaning solution.
4
Place the Bin back in the
robot.
Roomba Combo™ j7 Owner's guide
EN
3