depending on the sensitivity of your skin.
7. Switch off the device by moving the switch (2) down.
8. Place the protection cap (5) after use.
NOTE: Don't overdo the cleaning procedure.
NOTE: Replace the attachment every 3 to 6 months for good cleaning results.
WARNING: Use the product with caution if the skin is delicate and/or you have already
experienced problems with skin irritation or swelling. Note that the skin around the eyes and on
the lips is thinner and more sensitive, do not use device on this area.
INSTALLING THE ATTACHMENTS
To exchange the head, pull it from the connection pin. Attach the new head by pushing it onto the
connection pin until it locks into the position with a click. Turn off the device before changing the
attachments.
Attachments:
- facial brush – medium hardness - for deep pore cleansing and exfoliation. Prepares skin for
better absorption of creams, serums and moisturizers.
- face sponge - for make-up removing and general cleaning.
- rolling massager - for the application of regenerative creams and to stimulate collagen
production.
CLEANING
1. Clean the attachments thoroughly with water after each use. Use the warm water (max. 60C°).
2. Store brush (6), sponge (7) and rolling massager (8) head up to dry.
TECHNICAL DATA
Power supply: batteries: 2x 1.5V (AAA)
Waterproof: IPX 7
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container. Worn device should be returned to the appropriate
point storage because it is dangerous in the device ingredients may pose a threat to
the environment. The electrical device should be handed over to limit its reuse and
use. If in the device there are batteries you have to take out and give to the point
stored separately.
ALLGEMEINE SICHERHEITSBEDINGUNGEN
WICHTIGE HINWEISE ZUR GEBRAUCHSICHERHEIT BITTE
SORGFÄLTIG LESEN UND AUFBEWAHREN
FÜR ZUKÜNFTIGE REFERENZ
Die Garantiebedingungen sind abweichend, wenn das Gerät
gewerblich genutzt wird.
(DE) DEUTSCH
5