Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE BALANCE
2
In order to achieve a smooth and comfortable usage,
34
you must ensure that the roman chair is stabled and
secured. If you notice that the roman chair is unbalanced
during use, you should adjust the Adjustable Levelers
2
1
(No. 2) located on the Base Frame (No. 1). Rotate the
Adjustable Levelers (No. 2) clockwise to raise the
roman chair and counter-clockwise to lower the roman
chair.
ADJUSTING THE ANGLE
13
The roman chair has 3 different angle settings. To adjust
the angle of the roman chair, slightly lift the Adjustable
Rack (No. 13) so that the Rear Support Tube (No. 8)
8
can be moved freely.
Bring the Rear Support Tube (No. 8) to the desired
position on the Base Frame (No. 1) and lower the
1
Adjustable Rack (No. 13) back down.
ADJUSTING THE HEIGHT
To adjust the height, loosen and pull out Round Knob
(No. 7), slide the Adjustable Rack (No. 13) to the desire
13
height, re-insert and tighten the Round Knob (No. 7).
CAUTION!
7
To avoid any injury, please make sure that the Round
Knob (No. 7) is properly engaged and the Adjustable
Rack (No. 13) is secured tightly with the Round Knob
(No. 7). Once the Round Knob (No. 7) is tightened, the
height can't be adjusted.
MOVING THE ROMAN CHAIR
Before moving, please make sure the roman chair is
35R/L
folded.
To move the roman chair, one hand lift the end of the
13
34
Rear Stabilizer (No. 34) until the Transportation
Wheels (No. 27) on the Front Stabilizer (No. 33) touch
the ground, the other hand hold the Left and Right
Handlebars (No. 35L/R) to avoid the Adjustable Rack
(No. 13) unfolding during transporting. With the
33
Transportation Wheels (No. 27) on the ground, you
27
can transport the roman chair to the desired location with
ease.
12
Publicidad
