Peg-Perego veloce Instrucciones De Uso página 21

child is not too hot; do not leave near
sources of heat and keep away from
cigarettes. The rain canopy must not
be used on a stroller without a hood
or parasol it can attach to. Use the rain
canopy only under adult supervision.
Check the rain canopy does not
interfere with any moving mechanism
in the chassis or stroller. Remove the
rain canopy before folding the chassis
or stroller.
Veloce Chassis + Car Seat:
is approved for children from birth
up to 13 kg of weight.
When used in combination with
the car seat, this product does not
replace a cot or a bed.
Should your child need to sleep,
then it should be placed in a
suitable pram body, cot or bed.
Compatible items:
- PRIMO VIAGGIO SL
- PRIMO VIAGGIO SLK
- PRIMO VIAGGIO LOUNGE
Veloce Chassis + Pram Body:
is approved for children from birth
up to 9 kg of weight.
When used in combination with the
pram body: this product is suitable
for a child who cannot sit up by
itself, roll over and a cannot push
itself up on its hands and knees.
Maximum weight of the child: 9 kg.
The carrying handle (if present)
should be left outside the pram
body and out of the child's reach
during use.
Compatible items:
- CULLA GRANDE
- CULLA GRAN PAGODA
The images referring to the product details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS
CHASSIS
1 OPENING: Before opening the frame, if present, remove
(without using blades) all the die-cut cardboard
elements.
- Press the two side buttons on the handle bar and rotate
it in line with the frame tube (fig.a).
- Move the safety button located behind the handle
bar (fig.b) to the right or left and fully press the central
button on the handle bar (fig.c).
- Open the chassis, release both buttons (b-c) and lift the
handle bar upwards (fig.d) until it is fully open and clicks
into place (fig_e).
2 FITTING THE WHEELS:
To assemble the front wheels, fit them into the slots until
they lock into place (fig_a).
To assemble the rear wheels, fit them into the slots until
they lock into place (fig_b).
3 FITTING THE REAR WHEEL MUD FLAP:
Insert and attach the mud flaps, as shown, on the
supports attached to the chassis' rear wheel mounts.
To remove or replace them: press in the opposite
direction and pull out.
4 OPENING THE SEAT: Open the seat from the ends, lifting
the backrest until it clicks into place.
5 FITTING THE BASKET:
First fasten the front part of the basket: slide the side ties
into the channels along the frame (fig.a) and then fasten
the three Velcro straps as shown (fig.b-c).
6 Fitting the rear part of the basket:
Slide the side ties into the channels along the frame
uprights (fig.a) and then fasten the Velcro strap as
shown, making sure you take in the tube (fig.b).
CAUTION! If you do not hook the basket on correctly, as
shown, the basket will be unable to support the weight
of loads placed in it.
7 FIXED OR SWIVELLING FRONT WHEELS: To lock the front
wheels, rotate the lever inwards (fig_a); to release the
wheels and make them swivel, rotate the lever outwards
(fig_b).
On difficult terrain, we recommend using fixed
wheels.
8 ONLY FOR VELOCE TC
ADJUSTMENT OF THE REAR WHEEL SUSPENSIONS:
It is possible to adjust the rear wheel suspensions
according to your needs, based on the type of terrain
and the weight of your child.
SOFT: turn the knob towards you to make the
suspensions softer
HARD: turn the knob away from you to make the
suspensions harder
WARNING: ALWAYS adjust both rear wheel
suspensions in the same way.
9 BRAKE: To brake the frame, press the rear of the pedal
and check that the indicator is red (fig a).
To unlock the frame, press the front of the pedal and
check that the indicator is green (fig b).
10 ADJUSTABLE HANDLE BAR: To adjust the height of the
handle bar, simultaneous press the side buttons, rotate
the handle bar to the required position, and release the
buttons (fig_a).
FITTING THE CUP HOLDER: It is possible to fasten the
cup holder to one of the mushroom buttons on the
frame, located both to the right and the left of the
handle bar (fig_b).
11 CLOSING THE CHASSIS WITH THE SEAT FASTENED:
It is possible to close the chassis with the child seat
mounted both forward-facing and rear-facing.
FORWARD-FACING:
Close the hood, pull the backrest adjustment handle
(fig_1) and fold this fully forward until it closes (fig_2).
12 Align the handle bar with the frame (fig_a), move the
safety button located behind the handle bar (fig.b) to
the right or left and fully press the central button on the
handle bar (fig.c).
Close the chassis, release both buttons (b-c) and push
the handle bar downwards (fig d), holding the chassis
vertical until it clicks into the closed position (fig.e).
13 REVERSING THE SEAT ON THE CHASSIS:
To release the seat, press the buttons on both sides as
- 21 -