Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Click
Click
STEP 3:
One-by-one, lift the Gazebo Frame (A) off the ground by each collapsed
telescopic leg, and pull the lower half of each leg out of the upper half.
Extend each leg to the lowest height setting for now.
STEP 4:
Lift the Gazebo Frame (A) off the ground some, so that you can get
underneath. Push up on locking-mechanism until it is locked to the rod
of the center connector. Listen for the 'Click' to know that it is secured.
With the locking-mechanism secured to the connector with rod, the
crossbeams will be fully extended, the ribs underneath the canopy
straightened out, along with the canopy itself.
Select from the additional eyelets found on each telescopic leg to
extend the lower halves out further. There are two additional eyelets
to choose from, which raises the overall height of the gazebo.
9
Publicidad
