Publicidad
Idiomas disponibles
Idiomas disponibles
EN
BASIC OPERATION
FM RADIO MODE
-
Select FM RADIO mode on the amplifier.
-
Perform an automatic tuning of the stations to start using this mode.
-
Once finished, you can select the station you wish to listen to from among those already set.
-
If you wish to customise the list of stations stored in memory, you can do so via the menu options.
BLUETOOTH MODE
-
Select BLUETOOTH mode on the amplifier to pair your smartphone or tablet from which you want to
send audio.
On your smartphone/tablet, turn on Bluetooth mode. Finally, search for and select the KS-AMP device.
-
-
Select the music on your smartphone/tablet and start playback.
-
Make sure your smartphone/tablet is loud enough to be heard through the amplifier. This allows you to
control the volume from the amplifier itself at a later time without having to operate any other equipment.
USB MODE
-
Connect the USB device to activate USB mode directly or, if already connected, select USB mode by
pressing the M (MODE) button repeatedly.
-
Once the mode is activated, playback will start automatically.
AUX 1/AUX 2 MODE
-
Select AUX 1 (3.5 mm stereo jack plug, bottom panel of the amplifier) or AUX 2 (euroblock plug, rear
panel of the amplifier) mode.
-
Activate the audio device (player, mixer, PC, smartphone, etc.) to the AUX1 or AUX2 input and start
playback on it.
-
Make sure that the signal from your audio device is loud enough to be heard through the amplifier. This
allows you to control the volume from the amplifier itself at a later time without having to operate any
other equipment.
INSTALLATION
1.- Set the audio output to MONO or STEREO on the amplifier. If the audio output is set to MONO both
channels will play the same signal (left and right channel mixed), but if the configuration is set to stereo
the audio on the R and L channels will be different (R: right channel; L: left channel).
MONO
To do this, insert a flat-blade screwdriver into the slots on the side of the amplifier and pry the front and
rear of the amplifier apart. On the back of the front you will find a small switch with 2 positions (MONO
and STEREO), select the desired setting with the help of a flat screwdriver.
R + L
R + L
STEREO
R
R: right channel
L
L: left channel
- 6 -
Publicidad
