Safety Information; Preparation; Assembly Or Installation Instructions - Style selections MM1027MV 2550867 Manual Del Usuario

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Locate all electrical, plumbing, and gas lines. Cutting any of these may cause serious injury.
• If installing into a material other than drywall or a stud, consult a professional for proper installation.
WARNING
• Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing,
and gas lines.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 25 minutes (with assistance of another person)
Tools Required for Assembly (not included): Electric drill with the appropriate drill bit size, Level,
Phillips screwdriver, Measuring tape, Pencil and Circular saw
NOTE: Surface Mount: Use a 3/32 in. drill bit and #10 x 2 in. long pan head wood screws (requires 4 per
cabinet) for direct stud installation. Use a 1/4 in. drill bit and 1/8 in. Molly Bolts sized to the appropriate
wall thickness (requires 4 per cabinet) for drywall installation.
NOTE: Recess Mount: Use a 3/32 in. drill bit and 1-1/4 in. long pan head wood screws (requires 2 per
side) for installation.
INSTALLATION INSTRUCTIONS
1. Surface Mount
Hold the cabinet (A) at the desired position on wall.
NOTE: Make sure the cabinet is level.
Mark locations on wall through mounting holes in back
of cabinet (A).
Drill marked spots on the wall. If screws will not
be going directly into studs, insert wall anchors
(not included) .
Attach cabinet body (A) to wall, using appropriate
mounting hardware (not included) .
IS0735
1
3
A